VoIPon VP-2009 Especificações descarregar pdf (Página 34)

TD-VG3631

300Mbps Wireless N VoIP ADSL2+ Modem Router User Guide

Figure 4-5

Click Advanced, advanced selections for WAN Service Setup can be shown.

¾ MTU (bytes): Maximum Transmission Unit Size. Check this box then you can change the MTU

size. The default MTU value is 1500 Bytes. It is not recommended that you change the default

value unless required by your ISP.

¾ Enable NAT: This technology translates the IP addresses of a local area network to a different

IP address for the Internet. If this Modem Router is hosting your network’s connection to the

Internet, please select the check box. If another Router exists in your network, you don’t need

to select the option.

¾ Enable Fullcone NAT: It is a type of NAT, if not enabled, the default NAT will act.

¾ Enable SPI Firewall: A SPI firewall enhances network’s security. Select the option to use a

firewall, or else without a firewall.

¾ Enable IGMP Proxy: IGMP (Internet Group Management Protocol) is used to manage

multicasting on TCP/IP networks. Some ISPs use IGMP to perform remote configuration for

client devices, such as the Modem Router. The default value is enabled, and if you are not

sure, please contact your ISP or just leave it.

¾ Get IP Unicast: This is disabled by default. The minority of DHCP Server of ISP will not

support to enable this. When the Route is connected right but IP cannot get, you can select this

box.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 128 129

Sem comentários

Modele	Rodzaj dokumentu
CE-H22111-S1	Przewodnik Instalacji Siig CE-H22111-S1 video splitter, 8 strony
CE-H22011-S1	Przewodnik Instalacji Siig CE-H22011-S1 video splitter, 8 strony
4-port HDMI 1.3a	Przewodnik Instalacji Siig 4-port HDMI 1.3a, 8 strony
3-Port DVI	Przewodnik Instalacji Siig 3-Port DVI, 8 strony
CE-ED0011-S1	Przewodnik Instalacji SIIG CE-ED0011-S1 Installation guide, 8 strony

VoIPon VP-2009 Especificações Página 34